Sun Microsystems Ethernet MMF/UTP Adapter - Manual (Page 95)

Chapter 5 Configuring VLANs 61
2. Use the ifconfig(1M) to configure a VLAN virtual device, for example:
The output of ifconfig -a on a system having VLAN devices ipge123000 and
ipge224000
:
3. On the switch, set VLAN tagging and set VLAN ports to coincide with the VLANs
you have set up on the server.
Using the examples in Step 2 , you would set up VLAN ports 123 and 224 on the
switch.
Refer to the documentation that came with your switch for specific instructions for
setting VLAN tagging and ports.
# ifconfig ipge123000 plumb up
# ifconfig ipge4000 plumb up
# ifconfig -a
ipge4000: flags=201000843 mtu 1500
index 5
inet 0.0.0.0 netmask ff000000
ether 0:3:ba:d8:d3:a6
ipge123000: flags=201000843 mtu 1500
index 4
inet 0.0.0.0 netmask ff000000
ether 0:3:ba:d8:d3:a6