Sun Microsystems Ethernet MMF/UTP Adapter - Manual (Page 47)

13
C H A P T E R
2
Installing the Adapter
This chapter describes how to install the adapter in your system and verify that it
has been installed correctly.
This chapter contains the following sections:
■ “Installing the Low-Profile Adapter” on page 13
■ “Installing the ExpressModule Adapter” on page 18
Installing the Low-Profile Adapter
The following instructions describe the basic tasks required to install the adapter.
Refer to your system installation or service manual for detailed PCI-Express adapter
installation instructions
This section contains the following topics:
■ “To Install the Low-Profile Adapter” on page 13
■ “To Verify the Installation” on page 14
▼ To Install the Low-Profile Adapter
1. Halt and power off your system.
2. Power off all of the peripherals connected to your system.
3. Open the system unit.
4. Attach the adhesive copper strip of the antistatic wrist strap to the metal casing of
the power supply. Wrap the other end twice around your wrist, with the adhesive
side against your skin.