Sun Microsystems Ethernet MMF/UTP Adapter - Manual (Page 30)

xxx Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
Chapter 4 describes how to configure the e1000g driver parameters.
Chapter 5 explains virtual local area networks (VLANs) and provides configuration
instructions and examples.
Appendix A lists the specifications for the Sun PCI-Express Dual Gigabit Ethernet
adapter.
Appendix B provides an overview of the SunVTS diagnostic application and
instructions for updating the SunVTS software to recognize the adapter.
Appendix C explains how to install the driver software in a Linux environment.
Appendix D explains how to install and configure the driver software in x86
environments.
Using UNIX Commands
This document might not contain information about basic UNIX ® commands and
procedures such as shutting down the system, booting the system, and configuring
devices. Refer to the following for this information:
■ Software documentation that you received with your system
■ Solaris™ Operating System documentation, which is at:
http://docs.sun.com