Setting up the driver on a linux platform, To set up the driver on a linux platform, Platforms – Sun Microsystems Ethernet MMF/UTP Adapter User Manual

Page 111: Appendix c

A P P E N D I X

Installing the Sun PCI-Express Dual
Gigabit Ethernet Device Driver on
Linux Platforms

This appendix explains how to install the Sun PCI-Express Dual Gigabit Ethernet
device driver in a Linux environment. This appendix contains the following sections:

■

“Setting Up the Driver on a Linux Platform” on page 77

■

“Tuning for Maximum Performance” on page 80

■

“Setting Driver Parameters in a Linux Environment” on page 82

Setting Up the Driver on a Linux
Platform

If your system uses the Linux operating system you will need to perform the
following procedure to be sure the Sun PCI-Express Dual Gigabit Ethernet device
driver is properly installed and loaded.

▼

To Set Up the Driver on a Linux Platform

1. Build the Sun PCI-Express Dual Gigabit Ethernet device driver:

■

For RedHat, use the following command:

# rpmbuild --rebuild sun-pci-e-dual-gigabit-kernel-6.1.5.src.rpm