Led displays on the utp low-profile adapter, Low-profile hardware and software requirements – Sun Microsystems Ethernet MMF/UTP Adapter User Manual
Page 38
4
Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
LED Displays on the UTP Low-Profile Adapter
Four LEDs are displayed on the front panel of the Sun PCI-Express Dual Gigabit
Ethernet UTP adapter. They are labeled on the front panel as shown in
Low-Profile Hardware and Software
Requirements
Before using the Sun PCI-Express Dual Gigabit Ethernet adapter, ensure that your
system meets the following hardware and software requirements:
Note –
The preceding information is up-to-date at the time this manual was written.
Visit Sun on the World Wide Web at http://www.sun.com/ for the latest
information. Subsequent versions of this document have a higher number following
the final dash. That is 819-4090-11, becomes 819-4090-12.
TABLE 1-2
Front Panel Display LEDs for the UTP Low-Profile Adapter
Label
Meaning if Lit
Color
Source
ACT(1)
Data is being transmitted or
received
Green
I82571 (Circuit on board)
LINK(1)
Link is up
Green/Amber
I82571 (Circuit on board)
ACT(0)
Data is being transmitted or
received
Green
I82571 (Circuit on board)
LINK(0)
Link is up
Green/Amber
I82571 (Circuit on board)
TABLE 1-3
Hardware and Software Requirements for Sun PCI-Express Dual Gigabit Ethernet LP Adapter
Driver
Operating System
Servers
ipge
Solaris 10 SPARC Operating System and future compatible
releases
Sun Fire™ T2000
e1000g
Solaris 10 x86 Operating System and future compatible
releases
Sun Fire X2100, U40
e1000
RedHat Enterprise Linux 4.0 Update 3
SuSe Linux Enterprise Server 9 Service pack 3
Sun Fire X2100, U40