1directional magnification (size) – Savin 3360DNP User Manual

Page 58

Operation

Directional Magnification (Size)

Use this function to have the machine
select suitable reproduction ratios
based upon the dimensions of the
print you require and the size of the
original you specify.

1. Horizontal original size
2. Vertical original size
3. Horizontal print size
4. Vertical print size

Note

❒ You can enter sizes within the fol-

lowing ranges.

❒ The range of ratios which the ma-

chine can select depends on where
you place the original:
• On the exposure glass: 50-200%

❒ If the calculated ratio is over the

maximum or under the minimum
ratio, it is corrected within the
range of ratios automatically.

AAAA

Press the [Ratio] key.

BBBB

Select [Mag.] with the [

→

→] or {{{{}

}

}}}}}

key.

CCCC

Press the [OK] key.

DDDD

Select [Direct.Mag.(Size)] with the
[

→

→] or {{{{}

}

}}}}} key.

EEEE

Press the [OK] key.

Metric ver-
sion

1 - 999mm (in 1mm steps)

Inch version

0.1" - 99.9" (in 0.1" steps)

CP2M01EE