Savin 3360DNP - Manual (Page 112)

Operation
92
1
❒ The line marking the designated area should be more than 2mm, 0.08",
from any neighboring image.
a = 2mm, 0.08"
b = Neighboring image
c = Line marking the designated area
d = Image within the designated area
Command Sheets and Finished Prints
The following illustrations will help you understand how to draw a command
sheet.
❖ ❖ ❖ ❖ Drawing a command sheet using a diagonal line
The diagonal line method is easy to use for designating rectangular areas. It is
also more precise, but it is difficult to use for designating complex areas.
a
d
b
c
GRCOMM4E