Savin 3360DNP User Manual

Page 191

x Clearing Misfeeds

171

x Clearing Misfeeds

R CAUTION:

Note

❒ After clearing misfeeds, make sure

that all the doors, covers, and units
are closed and the

x indicator is

off.

❒ To prevent misfeeds, do not leave

any torn scraps of paper, originals,
or masters in the machine.

❒ When clearing misfeeds, do not

turn off the main switch. If you do,
your print settings will be cleared.

❒ If misfeeds occur repeatedly,

please contact your service repre-
sentative.

”

x + A” Paper Misfeeds in the

Paper Feed Section

AAAA

Remove the misfed paper.

-To prevent paper misfeeds:

Check the following before restarting
the printing run.
• Did you select an appropriate pa-

per type with the [Ppr.Type] key?

• Are the side pads in the correct po-

sitions?

To print on thin paper (47.1g/m

12.5 lb), slide the levers behind the
paper feed side plates in the direc-
tion of the arrow (see illustration).

• When paper is curled, correct as

shown.

• Be careful not to cut yourself on

any sharp edges when you reach
inside the machine to remove
misfed sheets of paper or mas-
ters.

Z066