Sun Microsystems SunFastEthernet Adapte - Manual (Page 84)

E-6 SunFastEthernet Adapter User Guide—November 1994
E
The driver has received a packet with an incorrect checksum field.
Indicates that the device receive FIFO has overflowed. This is most likely due
to the system being under a heavy load.
The driver has received a packet containing a noninteger multiple of eight bits
and there was a CRC error.
A packet collision has occurred after the channel’s slot time has elapsed. This
error usually indicates faulty hardware elsewhere on the net.
Indicates that the buffer posted to the device was smaller than the actual
packet received. This error is usually symptomatic of trouble in the operating
system or driver.
Cannot reset the receiver state machine. This is most likely due to a bad device
The DMA engine encounted a packet that it did not own during the
be: rx crc error
be: rx fifo overflow
be: rx framing/alignment error
be: rx late collision error
be: rx pkt buff error
be: rxmac did not reset
be: tx chained packet descriptor error