Sun Microsystems SunFastEthernet Adapte - Manual (Page 49)

Installing SunFastEthernet Software Using Solaris 2.x 4-3
4
automatically installs SUNWbmac. If disk space is a concern, and you choose
to install another cluster, use the pkgadd command to add the SunFastEthernet
driver as described in the following procedure:
4.2.3 Adding SUNWbmac Using pkgadd Command
1. Verify that SUNWbmac is not already installed by typing the following at
the prompt:
If no information is displayed then it is not installed.
2. Ensure that the Solaris CD is mounted (refer to your software manuals for
detailed information on the use of the CD).
When the CD is started Solaris_2.3 is automatically mounted on the default
path (/cdrom) as shown in the following example:
3. Use the pkgadd command to install the SunFastEthernet driver as follows:
Table 4-2 Solaris 2.3 Hardware: 5/94 CD
Cluster Size
Entire Distribution plus OEM Support 298.80 MByte
Entire Distribution 298.1 MByte
End User System Support 125.37 MByte
Core System Support 59.88 MByte
# pkginfo | grep SUNWbmac
# cd /cdrom/sol_2_3_hw594_sparc/s0/Solaris_2.3
# pkgadd -d ‘pwd‘ SUNWbmac