beautypg.com

Installing the sunfastethernet sbus card, 1 card installation – Sun Microsystems SunFastEthernet Adapte User Manual

Page 21

background image

2-1

Installing the SunFastEthernet
SBus Card

2

2.1 Card Installation

1. Remove the SunFastEthernet Adapter card from the antistatic bag and

spread the bag on a firm surface to provide a protective mat.

Figure 2-1

Handling the SunFastEthernet Adapter Card

2. Place the card, component side up, on the bag.

3. Install the card according to the SBus installation procedures in the

hardware installation or service manual for your system.

Note – If a SunFastEthernet card is installed in a slot and you later change the
location of the card, then you must perform the procedure indicated in
Section 2.4, “Relocating a SunFastEthernet Card (Solaris 2.x Only)”.

4. Following card installation, connect to a network.

See also other documents in the category Sun Microsystems Hardware: