beautypg.com

Network linkups/speed selection, 1 network link ups, 1 10/100mbps link up using rj45 connector – Sun Microsystems SunFastEthernet Adapte User Manual

Page 55

background image

5-1

Network Linkups/Speed Selection

5

The information presented in this chapter is applicable to both Solaris 1.x and
2.x software versions.

5.1 Network Link Ups

5.1.1 10/100Mbps Link Up Using RJ45 Connector

If your SunFastEthernet channel is connected to a 10 or 100Mbps network
through the RJ45 connector you will receive a Link Up message whenever you
boot the system or disconnect and then reconnect to the network.

For 10Mbps the message is:

For 100Mbps the message is:

# be: Using Onboard Transceiver

10 Mbits/sec Link Up

# be: Using Onboard Transceiver

100 Mbits/sec Link Up

See also other documents in the category Sun Microsystems Hardware: