Siemens Gigaset C100 DECT - Manual (Page 65)

64
Setting the base
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / settings_bs_hs.fm / 24.06.2003
Changing the ringer volume and the ringer melody
(C 150 only)
As with the handset, you can choose between different ringer volumes and ringer mel-
odies for the base (see page 59). You can also cancel the base ringer.
Adjusting the ringer volume on the base:
While an incoming call is ringing, press
ñ
(for louder) or
ð
(for softer) on the base .
Setting the ringer volume and melody from the handset:
Activating/cancelling the key click on the base: (C 150 only)
[______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Base Settings
[_________] OK
Select the menu item and confirm.
[_____________________________________________________________] [__________] Audio Settings OK
Confirm.
either ... Adjust the ringer volume:
[__________] [_____________________________________________________________] Ringer Volume
[_________] OK
Select the menu item and confirm. You hear the cur-
rent volume.
[_________] [_________] OK
Select desired volume (0–6) and confirm.
"0" cancels the ringer.
or ... Changing the ringer melody:
[__________] [_____________________________________________________________] Ringer Melody
[_________] OK
Select the menu item and confirm. You hear the cur-
rent melody.
[_________] [_________] OK
Select desired melody (1–10) and confirm.
... then
Long press (back to idle status).
[______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Base Settings
[_________] OK
Select the menu item and confirm.
[_____________________________________________________________] [__________] Audio Settings OK
Confirm.
[__________] [_____________________________________________________________] Key Tones
[_________] OK
Select the menu item and confirm (
‰
= On).
Long press (back to idle status).