Siemens Gigaset C100 DECT - Manual (Page 60)

59
Handset settings
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / settings_bs_hs.fm / 24.06.2003
Adjusting the loudspeaker volume
You can adjust the earpiece volume on three levels (1–3) and the handsfree volume on
five levels (1–5) – you can even do this while an external call is in progress.
Changing the ringer tone
You can set the ringer individually for an internal or an external call.
A range of options are available:
◆ Six volume levels:
– Five volume levels (1–5; e.g. volume level 2 =
ˆ ),
– 'Crescendo' call (6; the volume increases with each ring tone =
‰
).
◆ Ten melodies (1–10; melodies 1–3 are the 'classical ringer tones').
Changing the ringer melody
[_______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Audio Settings
[_________] OK
Select the menu item and confirm.
[_____________________________________________________________] [__________] Earpiece Volume OK
Confirm. You hear the current setting.
[__________] [_________] OK
Select the earpiece volume and confirm.
[__________] [_____________________________________________________________] Handsfree Volume
[_________] OK
Select the menu item and confirm.
[__________] [_________] OK
Select the handsfree volume and confirm.
Long press (back to idle status).
[_______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Audio Settings
[_________] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] Ringer Melody
[_________] OK
Select the menu item and confirm.
either ... For external calls:
Å
[_____________________________________________________________] [__________] External Calls OK
Confirm.
or ... For internal calls:
[__________] [_____________________________________________________________] Internal Calls
[_________] OK
Select the menu item and confirm.
... then
[_____________________________________________________________] [__________] Melody 1 OK
Confirm melody, e.g. Melody 1 (
‰
= On).
Long press (back to idle status).