Siemens Gigaset C100 DECT - Manual (Page 54)

53
Registering and de-registering handsets
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / registration.fm / 24.06.2003
Manual registration: Gigaset C 1 on Gigaset C 100 or C 150
You must initiate handset registration on the handset and on the base.
1. On the handset
Base 1 flashes in the display when the system PIN has been entered.
2. On the base
The base search is cancelled after 60 seconds. If registration has not completed inside
this time, repeat the process.
When registration is successful, the handset is automatically assigned the lowest unas-
signed number, as described in the chapter 'Automatic Registration' (page 52).
[_______________] MENU Press the display key to open the menu.
[__________] [_____________________________________________________________] Handset Settings
[_________] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] Register Handset
[_________] OK
Select the menu item and confirm.
[_______] OK
Enter the system PIN of the base
(the default is 0000) and confirm.
Press the Registration/Paging key on the base
(page 40) until you hear a signal tone (C 150 only)
(approx. 3 sec.). Registration is initiated.