Siemens Gigaset C100 DECT - Manual (Page 56)

55
Using several handsets
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / registration.fm / 24.06.2003
Using several handsets
Internal calls, ending a call
Internal calls are calls with other handsets that are registered on the same base. These
calls are free.
Calling a specific handset or all handsets simultaneously.
Changing the name of a handset
The names 'INT 1', 'INT 2' etc. are assigned automatically. However you can change
these names, e.g. to 'Anna' etc. (10 characters maximum). The changed name is dis-
played in the list of every handset.
[________] INT
Open list of handsets.
either ... Call a specific handset:
[__________] Select the handset (your own handset is checked ‰ )
and press the top half of the key.
or ... Call all handsets ('group call'):
Press the star key. All handsets are called.
... then End the call:
Press the end call key.
i
◆ To call a specific handset, you can also enter the handset number after
you open the list, e.g. INT
2
.
◆ If you receive a call during an internal call or group call, the group call
is not interrupted.
[________] INT
Open list of handsets.
[__________] [________________] MENU
Select the handset and press the display key.
[__________] [_____________________________________________________________] Change Handset Name
[_________] OK
Select the menu item and confirm.
Delete the old name with
Û .
[_______] OK
Enter the name and confirm.
Press the end call key.