Siemens Gigaset C100 DECT - Manual (Page 64)

63
Setting the base
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / settings_bs_hs.fm / 24.06.2003
Setting the base
All the settings for the base are made with a registered C 1 handset.
Protecting the telephone from unauthorized access
You can protect your telephone from unauthorized access by saving system settings for
the base with a system PIN which only you know. The system PIN must now be entered
for handset registration/de-registration, restoring factory settings, internal activation or
barring numbers, for example.
Changing the System PIN
You can change the base's 4-digit system PIN (default setting 0000) to a 4-digit PIN
which is known only to you. This also allows you to remotely operate the answering
machine from the Gigaset C 150 (page 46).
Changing the loudspeaker volume of the base (C 150 only)
The loudspeaker volume is the volume that the built-in base loudspeaker uses for mes-
sage playback and open listening. There are 5 volume levels for you to choose from. The
volume is set either on the base or with the handset.
Setting on the base:
During message playback, press
ñ (for louder) or ð (for softer) on the base .
Setting with the handset:
[_______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Base Settings
[_________] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] System PIN
[_________] OK
Select the menu item and confirm.
[_______] OK
Enter the current system PIN and confirm. For secu-
rity reasons the input is shown as four asterisks
(****).
[_______] OK
Enter the new system PIN and confirm.
[_______] OK
Repeat the new system PIN and confirm.
Long press (back to idle status).
[_______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Base Settings
[_________] OK
Select the menu item and confirm.
[_____________________________________________________________] [__________] Audio Settings OK
Confirm.
[__________] [_____________________________________________________________] Loudspeaker Volume
[_________] OK
Select the menu item and confirm. You hear the cur-
rent loudspeaker volume.
[__________] [_________] OK
Select desired volume (1–5) and confirm.
Long press (back to idle status).