Siemens Gigaset C100 DECT - Manual (Page 24)

23
Using the directory and other lists
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / Directories.fm / 24.06.2003
Opening lists with the Message key
You can use the Message key
f
to open the following lists:
1. SMS list,
2. Answering machine list (only C 150),
3. Messages in the network mailbox (if your network provider supports this function
and the network mailbox is configured for fast access, page 51),
4. Caller list.
You hear an advisory tone as soon as a new entry (SMS, messages on the built-in
answering machine) arrives in one or more lists. The Û icon appears in the display.
When you press the f key and open one of the lists, the Û icon disappears after you
quit the list even though there are still new entries in one of the other lists.
The following lists are displayed when you press
f
:
◆ If only one list has new entries, you will see the first new entry in that list.
◆ If several lists have new entries, those lists are offered for your selection.
◆ If there are no new messages in any of the lists, then all the lists are offered for your
selection.
◆ If calls are stored in the network mailbox, you will see a message if the correct set-
ting has been made (refer to the network mailbox operating instructions).
Caller list and answering machine list
(only C 150)
The numbers of the last 10 calls are saved in the caller list. The oldest entry is deleted
when the caller list is full and new entries are added.
Precondition: The caller's number has been identified (page 16).
Here is an example of how the caller list (
Calls List: ) appears in the display:
You can use the answering machine list to listen to the messages that are on the
answering machine on the Gigaset C 150 . Provided they were transmitted, the date and
time of arrival of each message and the caller's number are displayed.
Once you have listened to them, the new messages are added after the old messages in
the answering machine list.
Here is an example of how the answering machine list (Answering Mach.: ) appears in
the display:
Calls List: 01+05
Number of new entries in the list
Number of old, read entries in the list
Number of new entries/messages in the list
Answering Mach.: 01+05
Number of old, played entries/messages in the list