Siemens Gigaset C100 DECT - Manual (Page 23)

22
Using the directory and other lists
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / Directories.fm / 24.06.2003
Picking a phone number from the directory/speed dial list
If you are prompted to enter a telephone number while you are operating your tele-
phone, you can use the directory to do this.
Precondition: The entry field for external telephone numbers is displayed.
The telephone number is added to the entry field.
Last number redial list
The last number redial list contains the ten last dialed numbers. If names have been
stored for these numbers in the directory, then both the names and the numbers will be
displayed. You can use the last number redial list to redial the telephone numbers.
Dialling telephone numbers from the last number redial list
Deleting a single telephone number or the entire last number redial list
or
Open directory or speed dial list
[_________] [_________] OK
Select the entry and confirm.
[_________]
• Open the last number redial list.
[_________ ] Select an entry and press the top half of the key.
The number is dialed.
i
◆ To add or change the telephone number, press MENU and confirm
Display Number with OK .
◆ To add a telephone number from the last number redial list to the
directory (page 21), press MENU , Copy to Directory OK .
[_________]
• Open the last number redial list.
[_________] [_________________] MENU
Select an entry and open the menu.
either ... Delete a single telephone number:
[__________] [_____________________________________________________________] Delete Entry
[_________] OK
Select the menu item and confirm.
If there still entries on the list, press the key and hold
(back to idle status).
or ... Delete the entire last number redial list:
[__________] [_____________________________________________________________] Delete List
[_________] OK
Select the menu item and confirm.