Siemens OptiPoint 410 - Manual (Page 84)

Step by Step
Making multiline calls
84
Picking up a held call
A colleague in an open-plan office has put a call on hold
on a line key and requests you (verbally) to take over the
call. Your telephone does not have a key for this line.
n
Lift the handset.
> :
Select and confirm.
p
Enter the station number of the telephone at which the
call was held. You automatically pick up this call.
Forwarding calls for lines
If you activate call forwarding for a line that can also be
accessed at other telephones, the call forwarding func-
tion applies to all line keys belonging to this line.
Storing and activating station variable
call forwarding for a line
Press the line key, for example, for line 3235.
With the call forwarding key:
Press the key. The lamp lights up.
Press the key.
or Via the program/service key:
Press the key. The lamp lights up.
The available types of variable call forwarding for every
line are identical with the call forwarding types descri-
bed above. Therefore, for all further steps see
Æ page 21.
Direct call pickup?
Line
program/service
Call forwarding
program/service