Siemens OptiPoint 410 - Manual (Page 55)

Making Calls – Convenience Functions
55
Step by Step
A connection to the destination loudspeaker is set up
immediately, if
•
there is no busy condition
• the handset is cradled
• and voice-calling protection has not been activated
The called party accepts the voice call by lifting the
handset.
If the called party presses the loudspeaker key or the
line key (if installed), the connection is aborted.
Voice calling to a fixed destination
(using repertory key)
The system code-number for "voice calling in the group"
+ the speed-calling code for the group member in ques-
tion is stored on the repertory key
Æ page 65.
Press the programmed repertory key.
A connection is immediately set up to the destination
loudspeaker.
The called party can accept the voice call by lifting the
handset.
If the called party presses the loudspeaker key or the
line key (if installed), the connection is aborted.
Two-way voice calling to a variable destination
With two-way voice calling within a group the destina-
tion loudspeaker and microphone are automatically ac-
tivated.
n
Lift the handset.
or if the handset is cradled: Handsfree talking (not availab-
le with optiPoint 410 economy).
p
Enter the system code-number for "two-way voice call-
ing in a group" and
p
the speed dialing code for the group member in ques-
tion
or
Press the key for "two-way voice calling in a group"
(must be installed)
and
p
enter the speed dialing code for the group member in
question.
Enter the code!