Siemens OptiPoint 410 - Manual (Page 80)

Step by Step
Making multiline calls
80
Identifying the line used
If several lines are seized at the same time, you can find
out which line you are conversing on.
With the Show Used Line key configured:
Press the key.
Via the program/service key:
Press the key. The lamp lights up.
lj
Enter the service code.
or
> :
Select and confirm.
> :
Select and confirm.
The number and status of the line currently in use are
displayed.
A display such as "3235 active" means:
the selected line (3235) is being used.
Alternating between different lines
Precondition 1: The service personnel has specified
that when the user switches between lines, the lines
are placed on hold automatically and can only be
cleared again by replacing the handset or by pressing
the Disconnect key.
Precondition 2: You are connected to various other par-
ties on two or more lines. These can be either calling
parties
Æ page 77 or called parties Æ page 79.
You are conducting a call on line 1, for example. The line
key of the party on hold flashes slowly.
Press the slowly flashing line key. The first party is on
hold on line 1.
Press the slowly flashing line key. The second party is
on hold on line 2.
You can alternate between the parties as often as you
wish.
Show used line
program/service
More features?
Show used line?
Line 2
Line 1