beautypg.com

Table 5-2 – Symbol Technologies SPS 3000 Series User Manual

Page 73

background image

5-10

SPS 3000 Series Programmer’s Guide

Table 5-2. Flash Memory Utilities

Utility

Description

Erase.exe

Erases all of Flash memory.

Warning: All files in Flash memory are lost
after this program runs.

Unlock

Unlocks Flash memory. After this program
runs, files can be copied to the “\Compaq
Disk” directory on the iPAQ.

Lock

Locks Flash memory. After this program runs,
the “\Compaq Disk” directory reverts back to
read only status. Read only is the default state
of the “\Compaq Disk” directory.

CreateImage.exe

This program reads the binary image of Flash
memory and saves it to a file you choose.

WriteImage.exe

This program reads a binary image created by
the CreateImage program and writes it to
Flash memory. The image file name can be
passed to the WriteImage

program

via the

command line for automation purposes.

Warning: After WriteImage is used, the SPS
3000 must be removed and re-inserted for the
files to show up in the “\Compaq Disk”
directory.