Checking battery power, Checking battery power -7 – Symbol Technologies SPS 3000 Series User Manual
Page 26
2-7
Hardware Setup
Checking Battery Power
Note: Battery longevity depends upon many factors, such as amount and
type of usage. For example, extended wireless communications will
have an impact on battery life. To conserve battery power, the
integrated 802.11b radio (WLAN) has the capability to reduce power
consumption when wireless communications is not in use.
The SPS 3000 battery must have a sufficient charge. When the SPS 3000 battery falls
below critical levels, the iPAQ will automatically shut the SPS 3000 down and the following
screen displays on your iPAQ.
This does not affect the iPAQ main battery and the operation of the iPAQ without the SPS
3000.
To check the battery power:
1.
Power on the iPAQ by depressing and releasing the power button.
2.
Tap
to display the Start screen.
3.
Select Settings.
4.
Select the System tab on the bottom of the Settings screen.