Symbol Technologies SPS 3000 Series - Manual (Page 25)

2-6
SPS 3000 Series Programmer’s Guide
Charging the SPS 3000 and iPAQ Without the Cradle
1. Insert the iPAQ into the SPS 3000 (see Inserting the iPAQ into the SPS 3000 on
page 2-1).
2. Connect one end of the AC adapter into a power outlet and the other end into the
power jack on the bottom of the iPAQ.
Figure 2-6. Connecting Power Without Cradle
3. A flashing amber LED on the iPAQ indicates charging is in progress. When the
amber LED becomes constant, the iPAQ (main) battery is fully charged. The SPS
3000 (external) battery begins charging at this time.
Display the Power settings screen to view charging status (see Checking Battery Power on
page 2-7).
Note: The SPS 3000 battery begins charging only after the iPAQ (main)
battery is fully charged. The total charge time for both batteries can
take up to 5 hours when both batteries are completely discharged.