Siemens BUSINESS CLASS 5935 - Manual (Page 34)

SIEMENS 5930/5935 Business Gateway
User’s Guide Chapter 3 Easy Setup
Select Protocol
SIEMENS 28
Local Area Network Configuration
Local Area Network configuration information is configured on the LAN IP Configuration page.
To configure the Local Area Network:
1. In IP Address, enter the network address of the router. This address must be globally unique unless NAT
has been enabled.
2. In Subnet Mask, enter the subnet mask to use along with the IP address to determine if specific LAN IP
traffic should be forwarded to the WAN.
3. Click Save and Reboot. The router will reboot with the new configuration settings.
On completion of the reboot process, you will be required to login again.