beautypg.com

Dynamic host configuration protocol – Siemens BUSINESS CLASS 5935 User Manual

Page 33

background image

SIEMENS 5930/5935 Business Gateway
User’s Guide

Chapter 3 Easy Setup

Select Protocol

SIEMENS

27

Dynamic Host Configuration Protocol

Dynamic Host Configuration Protocol (DHCP) provides a dynamic, “upon request,” IP address to computers
and other networked devices. The router can act as a DHCP server for devices on your local network.

The router provides the flexibility to use different ranges of IP addresses to be assigned by the DHCP server
housed in the router. DHCP configuration is done from the DHCP Configuration page.

To configure DHCP:

1. Optionally select DHCP server enabled on the LAN. If selected, the DHCP server dynamically assigns IP

addresses to all LAN-side devices.

2. Select one of the following to configure the Domain Name Service:

Obtain DNS information automatically:
The DNS server address will be learned when DHCP client requests are placed over the WAN link.

Configure DNS manually:
Define DNS server address manually from information you get from your service provider. If you select
this option, provide the following information.
– Domain Name

The router’s DNS domain name as assigned by your service provider.

– Primary DNS Server

IP address where DNS requests will be sent.

– Secondary DNS Server

Optional. IP address where DNS requests will be sent if the primary DNS server is unavailable.

– Primary WINS Server

IP address of the Windows Internet Naming Service where WINS requests will be sent. This maps
NetBIOS names to IP addresses similar to DNS.

– Secondary WINS Server

Optional. IP address where WINS requests will be sent if the primary WINS server is unavailable.

3. Click Next. This displays the

LAN IP Configuration

page.

This manual is related to the following products: