Sharp FO-IS125N - Manual (Page 71)

Using MANUAL Mode
69
4. Receiv
ing
Fa
x
e
s
1
When the machine rings, pick up the handset.
2
If you hear a soft fax tone, wait until the display shows [RECEIVING] and
then replace the handset.
♦
If [RECEIVING] does not appear (or if you have set the Fax Signal Receive
setting to NO (pp. 136, 138)), press to begin reception.
3
If the other party first speaks with you and then wants to send a fax,
press after speaking. (Press before the sender presses their Start
key.)
•
When [RECEIVING] appears in the display, hang up.
START
START
1
Answer the extension phone when it rings.
Answering on an extension phone connected to the same
line
Using MANUAL Mode
To select MANUAL mode, press (with no document in the feeder)
until [MANU] appears in the display.
In MANUAL mode, you must answer all calls (even faxes) by picking up the
machine’s handset or an extension phone connected to the same line.
Answering on the machine’s handset
Important: If a document is loaded in the machine’s feeder, remove it before
performing the steps below.
RECEPTION