Sharp FO-IS125N - Manual (Page 23)

Installing the Toner Cartridge and Drum Cartridge
21
1. Installation
7
Grasp the cartridge handle and insert
the toner cartridge into the print
compartment, sliding it along the
guides.
•
Make sure the cartridge “clicks” into
place.
•
Do not touch the roller in the toner
cartridge.
8
Close the side cover (
➊
), the front
cover (
➋
), and the top cover (
➌
).
•
When closing the side cover, press on
the dots to make sure the cover is
completely closed. Otherwise, light may
enter the print compartment and
damage the drum.
•
The display will show:
[TONER EXCHANGED?
] /
[ 1 = NEW, 2 = OLD ]
9
If you installed a new toner cartridge, press to select NEW (this will
reset the toner counter to zero).
•
If you temporarily removed and then replaced an old toner cartridge for
maintenance or other reason, press to continue using the previous
toner count. (Note: Be sure to press or the machine will not alert you
when the toner cartridge is out of toner.)
Grasp this handle to
insert the cartridge
1
2
3