Sharp FO-IS125N - Manual (Page 140)

Option Settings
138
FAX SIGNAL
RX If you hear a soft fax tone after the machine rings and you answer
on the machine’s handset or an extension phone connected to the
same line, the machine will automatically begin reception. If
desired, you can turn automatic reception off. Press (YES)
to turn on the the automatic reception function, or (NO) to
turn off the function. If you select NO, you must start reception
manually by pressing on the machine each time you hear a
soft fax tone after answering a call.
Initial setting: YES
POLLING
If you wish to use a Rapid Key as a polling key, press (YES),
press the Rapid Key that you wish to use (any Rapid Key not
already in use), and then press .
If you do not wish to use the polling function, press (NO).
Note: When a Rapid Key is used as the polling key, it cannot be
used for Rapid Key Dialing.
Initial setting: NO
AUTO PRINT
OUT
Press (YES) to have the machine automatically print an
Activity Report once every 40 send/receive operations. (The
report can still be printed manually at any time.) Press (NO)
to turn off Auto Print Out.
Initial setting: NO
ECM MODE
Press (YES) to have any distortions in a transmission due to
noise on the telephone line automatically corrected before print-
out at the receiving end. This is only effective when the other
machine has ECM as well. Press (NO) to turn off ECM
mode. (When there is considerable noise on the line, you may find
that ECM slows transmission. Turning off ECM mode may
increase transmission speed.)
Initial setting: YES
START
START