Sharp FO-IS125N - Manual (Page 38)

Setting up Network Scanning
36
E-mail settings on the machine’s operation panel
The e-mail settings that can be configured on the machine’s operation panel
are shown below. Enter the required information for each setting as explained
in the table (this is done in step 4 of the procedure on the previous page).
♦
The sender address is required (if not entered in the Web page). The other
settings are optional.
♦
Use the letter keys to enter text. For information on using the letter keys,
see page 12.
♦
The e-mail subject, e-mail message, and file format that are entered below
are default settings. They will be used if you do not specify these items at
the time of transmission.
Setting Description
SENDER
NAME Enter the sender name that will appear in the e-mail message
(max. of 50 characters). When finished, press .
SENDER
ADDRESS Enter your sender e-mail address (max. of 128 characters). When
finished, press . (Note: Be sure to enter a valid e-mail
address. Return e-mail and undelivered mail reports will be sent to
this address. In addition, some SMTP servers reject outgoing e-
mail if a valid sender e-mail address is not entered.)
E-MAIL
SUBJECT Enter a default subject (max. of 128 characters). When finished,
press .
E-MAIL
MESSAGE Enter a default message (max. of 256 characters). When finished,
press .
FILE FORMAT This sets the default format for scanned files sent by directly
entering an e-mail address, or by broadcasting. Press for
TIFF or for PDF.
Initial setting: TIFF
START
START
START
START