Sharp FO-IS125N - Manual (Page 139)

Option Settings
137
9
. Opti
o
n
Settings
NUMBER OF
RINGS This sets the number of rings on which the machine answers calls
when the reception mode is set to AUTO. Enter any number from
1 to 5.
Initial setting: 4 rings.
Note: If you have turned on Distinctive Ring (page 115), the
machine will answer after 2 rings regardless of this setting.
TRANSACTION
LIST This sets the condition for printing transaction reports (see page
143). Press a number key as follows:
(ALWAYS PRINT): Print after every fax transmission,
reception and error.
(ERROR/MEMORY): Print only after an error or memory
operation.
(SEND ONLY): Print after every fax transmission.
(ERROR ONLY): Print only when an error occurs.
(NEVER PRINT): Never print.
Initial setting: ERROR ONLY
DIAL MODE
This sets the dial mode. Press (TONE) if you are on a tone
dial line, or (PULSE) if you are on a pulse dial line.
Initial setting: TONE
DISTINCTIVE
RING If you subscribe to a distinctive ring service from your phone
company, use this setting to select the ring pattern of the phone
number that you will use as a fax number. For more information,
see page 115.
Initial setting: OFF SETTING