Sharp FO-IS125N - Manual (Page 37)

Setting up Network Scanning
35
2. Netw
or
k
Scanning
Using the machine’s operation panel to configure
e-mail settings
The machine’s operation panel can also be used to configure several of the e-
mail settings.
The settings that can be configured on the machine’s operation panel are
shown in the table on the next page. Follow the steps below to display the e-
mail settings, and then configure each setting as explained in the table.
1
Press , then until [E-MAIL SETTING] appears.
2
Press , then repeatedly until the setting that you wish to
configure appears.
3
Press . (Note: This step is not necessary for the “FILE FORMAT”
setting.)
4
Enter the required information for the setting as explained in the table
on the next page.
5
After configuring the setting, the next e-mail setting will appear in the
display. You can configure the next setting, or press to exit.
FUNCTION
STOP