Sharp FO-IS125N - Manual (Page 63)

Sending a Fax by Automatic Dialing
61
3. Sending
Fa
x
e
s
3
Press to select “FAX”.
Display: [FAX # MODE]
4
Enter the fax or phone number by pressing the number keys (maximum
of 32 digits).
(Note: A space cannot be entered.)
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
5
Press .
6
Enter the name of the destination (max. 20 characters).
•
For information on using the letter keys, see page 12.
7
Press .
8
If you selected a Rapid Key or Speed Dial number in Step 2, the display
will briefly show [STORED], and then [NEW NUMBER]. Go to Step 9.
If you did not select a Rapid Key or Speed Dial number in Step 2, the
display will show the next available Rapid Key or Speed Dial number. If
that number is acceptable, press and go to Step 9. If not, press the
desired Rapid Key, or press and enter the desired 3-digit Speed
Dial number, and go to Step 9.
9
Return to Step 2 to store another number, or press to exit.
DEL
REDIAL
START
START
START
SPEED DIAL
STOP