Sharp FO-IS125N - Manual (Page 116)

Broadcasting
114
1
Press , then until [ENTRY MODE] appears.
2
Press , then until [GROUP ENTRY] appears.
3
Press (SET) to store a group. (Press (CLEAR) to clear a group.)
4
Press the Rapid Key that you want to use as a Group Key. (If you are
clearing a Group Key, press the Group key that you want to clear and go
to Step 8.)
•
If [ALREADY STORED] or [RAPID # STORED] appears, the key has
already been programmed. Clear the key or try another Rapid Key.
5
Select a destination using one of the following methods:
•
Press a Rapid Key.
•
Press and enter a 3-digit Speed Dial number.
•
Press or until the desired destination appears in the display.
6
Press to enter the destination.
7
Repeat Steps 5 and 6 for each of the other desired destinations
(maximum of 50).
•
You can press to scroll through and check your entered destinations.
To delete a destination, press when it appears.
8
When you have finished entering the destinations, press .
FUNCTION
SPEED DIAL
DEL
START