Sharp FO-IS125N - Manual (Page 27)

Setting the Date and Time
25
1. Installation
Setting the Date and Time
Set the date and time as explained below.
♦
The date and time will be printed automatically at the top of all fax pages
you send (this is required by FCC regulations). The date and time also
appear in the display.
♦
To have the clock automatically move forward and backward at the
beginning and end of daylight-saving time, turn on the “DAY LIGHT
SAVING” setting (pp. 136 and 139). Do this before you set the date and
time.
1
Press , then until [ENTRY MODE] appears.
2
Press , then until [DATE & TIME SET] appears.
3
Press .
•
The currently set date appears (example): [DATE 08-15-2007]
4
Enter a two-digit number for the month (“01” for January, “02” for
February, “12” for December, etc.).
Example: January
[DATE 01-15-2007]
•
To correct a mistake, press to move the cursor back to the mistake
and enter the correct number.
5
Enter a two-digit number for the day (“01” to “31”).
Example: the 5
th
[DATE 01-05-2007]
FUNCTION