JVC GET0602-001A - Manual (Page 37)

37 OPERATIONS
ENGLISH
USB operations
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to
the unit.
• You can also connect the iPod to the USB terminal of the unit. For details of the operations,
45 – 46.
USB cable from the rear of the unit
This unit can play JPEG/MPEG1/MPEG2/MP3/WMA/
WAV files stored in USB mass storage class device.
• You can operate the USB device in the same way you
operate the files on discs.
• All tracks in the USB device will be played repeatedly
until you change the source.
• Playback starts from where it has been stopped
previously when you reconnect the same USB device
again.
• To select the playback mode, 22, 23.
• To select tracks on the list, 25.
Changing the display information
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while “Now Reading” is shown on the screen.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, 50.
( 53)
EN30-37_KW-ADV792[J]f.indd 37 EN30-37_KW-ADV792[J]f.indd 37 1/12/09 5:49:38 PM 1/12/09 5:49:38 PM