JVC GET0602-001A - Manual (Page 178)

32
ENGLISH
Disc operations
The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
If “ ” appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing “ ,” operations will not be accepted.
!
Insert a disc.
Monitor panel closes automatically.
If not, press [Close].
Caution:
Do not place your finger behind the monitor panel.
~
Open the monitor panel.
<Open/Tilt> menu is displayed.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
Ÿ
When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by
connecting an amplifier or a decoder compatible
with these multi-channel sources. (
55)
• To select the playback mode, 24.
• To select tracks on the list, 25.
Label side
Open/Tilt
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure to select <EJECT OK?>.
• Discs can be forcibly ejected. (
3)
Back
EN30-37_KW-AVX726_005A_3.indd 32 EN30-37_KW-AVX726_005A_3.indd 32 12/10/08 2:03:01 PM 12/10/08 2:03:01 PM