JVC GET0602-001A - Manual (Page 104)

34 OPERATIONS
USB operations
(for KW-AVX726/KW-AVX725/KW-AVX724)
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to
the unit.
• You can also connect the iPod to the USB terminal of the unit. For details of the operations,
39, 40.
USB cable from the rear of the unit
This unit can play JPEG/MPEG1/MPEG2/MP3/WMA/
WAV files stored in USB mass storage class device.
• You can operate the USB device in the same way you
operate the files on discs.
• All tracks in the USB device will be played repeatedly
until you change the source.
• Playback starts from where it has been stopped
previously when you reconnect the same USB device
again.
• To select the playback mode, 20.
• To select tracks on the list, 22.
Changing the display information
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while “Now Reading” is shown on the screen.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, 46.
( 50)
EN34-43_KW-AVX726_001A_3.indd 34 EN34-43_KW-AVX726_001A_3.indd 34 12/10/08 11:33:33 AM 12/10/08 11:33:33 AM