Menu settings, Characters you can enter for titles – JVC GET0602-001A User Manual
Page 118
48
• The text information scrolls on the monitor. This
unit can display up to 40 characters when using the
interface adapter and up to 128 characters when
using the USB 2.0 cable or USB Audio and Video
cable, KS-U30.
Notice:
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following JVC web site:
website only)
For the USB connection:
When <iPod Artwork> is set to <On>:
Do not press any keys during the first 5 seconds
or more of playing back any track containing an
Artwork*. It takes 5 seconds or more to display
an Artwork and no operations are available while
loading it.
* The picture displayed on the iPod’s/iPhone’s screen
while playing back a track.
Menu settings
• If you change the <Amplifier Gain> setting from
<High> to <Low> while the volume level is set
higher than “30,” the unit automatically changes the
volume level to “VOL 30.”
• After you change any of <Menu Language/Audio
Language/Subtitle> settings, turn off then on the
power, and re-insert the disc (or insert another disc)
so that your setting takes effect.
• When you select <16:9> for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if <4:3PS> is selected, the screen size may
become <4:3LB> for some discs.
JVC bears no responsibility for any loss of data
in an iPod/iPhone and/or USB mass storage
class device while using this unit.
Characters you can enter for titles
In addition to the roman alphabet (A – Z, a – z), you
can use the following characters to assign titles. (
19)
• When <Руccĸий> is selected for <Language>.
(
13)
Upper and lower cases
Numbers and symbols
• When any language other than <Руccĸий> is
selected for <Language>. (
13)
Upper and lower cases
Numbers and symbols
EN44-51_KW-AVX726_001A_f.indd 48
EN44-51_KW-AVX726_001A_f.indd 48
12/24/08 5:14:34 PM
12/24/08 5:14:34 PM