JVC GET0602-001A - Manual (Page 187)

41 EXTERNAL DEVICES
ENGLISH
Continued on the next page
When a call comes in...
The source is changed to “ Bluetooth PHONE”
automatically.
When is activated...
The unit answers the incoming call automatically.
(
29)
When is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
or VOL +/–).
Using the Bluetooth cellular phone
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
or VOL +/–).
• You can adjust the microphone volume, 29.
To make a call, use <Dial Menu>. ( 27)
~
Press [SOURCE], then press [Bluetooth PHONE].
Ÿ
Press [ ].
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using
menu). ( 27 – 29)
Name and phone number (if acquired)
FLAT
AM
3:00
SOURCE
Connected Device Name
Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
[
5 / ∞]: Selects the
other registered device.
Connected device name
• When a cellular phone with audio function is
registered/connected, appears.
Activates < Voice Dialing >
function. (Hold)
Display < Dial Menu > screen.
• Appears on any source information screen
when the Bluetooth adapter is connected.
Bluetooth icon
• Lights up when the Bluetooth adapter
is connected.
EN38-49_KW-AVX726_005A_3.indd 41 EN38-49_KW-AVX726_005A_3.indd 41 12/10/08 2:40:09 PM 12/10/08 2:40:09 PM