beautypg.com

Juniper Networks T1600 User Manual

Page 97

background image

Configurable WAN-PHY mode options:

loopback

mpls

path-trace

trigger

Optical diagnostics, monitoring, and alarms supported in Junos OS Release 10.4.

Flexible Ethernet Services Encapsulation

802.1q virtual LANs (VLANs)

Ethernet OAM 802.1ag continuity check

Ethernet OAM 802.3ah (remote loopback is not supported for this PIC)

VLAN stacking

Channels defined by two stacked VLAN tags

Multiple tag protocol identifiers (TPID) support

IP service for nonstandard TPID and stacked VLAN tags

Passive flow monitoring supported in Junos OS Release 11.2 and later

MAC learning, accounting, and filtering

Virtual Router Redundancy Protocol (VRRP) support

Software features

You can install any transceiver supported by the PIC.

Connector: Duplex LC/PC (Rx and Tx)

Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:

10GBASE-S (model number: XFP-10G-S)

10GBASE-L (model number: XFP-10G-L-OC192-SR1)

10GBASE-E (model number: XFP-10G-E-OC192-IR2)

10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)

Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications

DWDM Tunable XFP transceivers:

10GBASE-ZR (model number: XFP-10G-CBAND-T50-ZR) supported in Junos OS Release
10.2 and later

Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications

DWDM supported wavelengths—see 10-Gigabit Ethernet DWDM Transceiver Wavelengths

Cables and connectors

Port LED, one for each port:

Off—Port is not enabled.

Green—Port is online with no alarms or failures.

Yellow—Port is online with alarms for remote failures.

Red—The router has detected a failure with alarms for local failures.

LEDs

97

Copyright © 2013, Juniper Networks, Inc.

10-Gigabit Ethernet LAN/WAN PIC with XFP (T1600 Router)