Juniper Networks T1600 - Manual (Page 63)

Channelized STM1 IQ PIC (T1600 Router)
• Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18 .
Software release
• One STM1 port
• Power requirement: 0.39 A @ 48 V (18.6 W)
• Fine-grained queuing per logical interface
• Channelization: STM1c, fractional E1, framed and unframed DS0
• Model number: PB-1CHSTM1-SMIR-QPP
Description
• Packet buffering, Layer 2 parsing
• Local and remote loopback testing
Hardware features
• Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
• SNMP: SONET/SDH MIB, T1/E1 MIB
• Dynamic, arbitrary channel configuration
• Full bit error rate test (BERT) patterns at E1 and DS0 levels
• Encapsulations:
• High-Level Data Link Control (HDLC)
• Frame Relay
• Circuit cross-connect (CCC)
• Translational cross-connect (TCC)
• Point-to-Point Protocol (PPP)
Software features
• Duplex SC/PC connector (Rx and Tx)
• Single-mode fiber
• Intermediate-reach fixed transceiver
• Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
NOTE: This PIC supports only SDH.
Cables and connectors
63 Copyright © 2013, Juniper Networks, Inc.
Channelized STM1 IQ PIC (T1600 Router)