Juniper Networks T1600 - Manual (Page 93)

10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T1600 Router)
PRIMARY
g004436
• Junos OS Release 10.1 and later (Type 4)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18 .
NOTE: In some Juniper Networks documentation, the 10-Gigabit Ethernet LAN/WAN PIC with
SFP+ (PD-5-10XGE-SFPP) is referred to as the 10-port 10-Gigabit Oversubscribed Ethernet PIC.
In oversubscribed Ethernet mode (default), all 10 ports are enabled and oversubscription is
permitted. In line-rate mode, this PIC does not allow oversubscription and supports only 5 ports
(0, 2, 4, 6, and 8).
Software release
• Ten 10-Gigabit Ethernet SFP+ ports (only ports 0, 2, 4, 6, and 8 are supported in line-rate mode)
• Total bandwidth: 50 Gbps
• Power requirements: 3.3 A @ –48 V (158.4 W)
• Model number: PD-5-10XGE-SFPP
Description
• High-performance throughput:
• WAN-PHY mode at 9.953 Gbps
• LAN-PHY mode at 10.3 Gbps
• Full-duplex mode
• Large maximum transmission units (MTUs) of up to 9192 bytes
Hardware features
93 Copyright © 2013, Juniper Networks, Inc.
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T1600 Router)