Juniper Networks T1600 - Manual (Page 120)

SONET/SDH OC12/STM4 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
• Junos OS Release 9.3 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18 .
Software release
• One OC12/STM4 port
• SONET or SDH is configurable on a per-port granularity
• Power requirement: 0.58 A @ 48 V (27.8 W)
• Model number: PB-1OC12-STM4-IQE-SFP
Description
• Port is numbered 0. Hardware features
Software features • Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
• Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
• Packet buffering, Layer 2 parsing
• Local line and remote payload loopback testing
• Encapsulations:
• Circuit cross-connect (CCC)
• Translational cross-connect (TCC)
• Extended Frame Relay for CCC and TCC
• Flexible Frame Relay
• Frame Relay
• Frame Relay for CCC
• Frame Relay for TCC
• Frame Relay port CCC
• High-Level Data Link Control (HDLC)
• HDLC framing for CCC
Copyright © 2013, Juniper Networks, Inc. 120
T1600 Core Router Interface Module Reference