Gigabit ethernet dwdm otn pic (t1600 router) – Juniper Networks T1600 User Manual
Page 101

10-Gigabit Ethernet DWDM OTN PIC (T1600 Router)
g003926
•
Junos OS Release 9.4 and later (Type 3)
For information on which FPCs support this PIC, see
“T1600 PIC/FPC Compatibility” on page 18
Software release
•
One 10-Gigabit Optical Transport Network (OTN) port for transport of 10-Gigabit Ethernet
(10GBASE-R) traffic
•
Power requirement: 0.55 A @ 48 V (26.6 W)
•
Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network
•
Model number: PC-1XGE-DWDM-OTN
Description
•
C-band ITU-Grid with 50 GHz spacing
•
High-performance throughput at speeds up to 10 Gbps
•
Full-duplex mode
•
Maximum transmission units (MTUs) up to 9192 bytes
•
64 source MAC address filters
•
960 destination MAC filters
•
89 individual wavelengths
Hardware features
•
Enhanced optical monitoring capabilities
•
CLI configurable wavelength support
•
Virtual Router Redundancy Protocol (VRRP) support
•
802.1q virtual LANs (VLANs) support
•
IEEE 802.3ad Link Aggregation
•
RMON EtherStats
Software features
•
Duplex SC connector (RX and TX)
•
Fixed transceiver
•
Dense wavelength division multiplexing (DWDM) optical transport network (OTN) transceiver.
Optical interface specifications—see 10-Gigabit Ethernet DWDM OTN Optical Interface
Specifications and 10-Gigabit Ethernet 10GBASE Optical Interface Specifications.
Cables and connectors
101
Copyright © 2013, Juniper Networks, Inc.
10-Gigabit Ethernet DWDM OTN PIC (T1600 Router)