Juniper Networks T1600 User Manual

Page 127

You can install any transceiver supported by the PIC. For information about installing and removing.

•

Duplex LC/PC connector (Rx and Tx)

•

SONET/SDH OC48/STM16 fiber-optic SFP transceivers:

•

Short reach (SR-1) (model number: SFP-1OC48-SR)

•

Intermediate reach (IR-1) (model number: SFP-1OC48-IR)

•

Long reach (LR-1) (model number: SFP-1OC48-LR)

Optical interface specifications—see SONET/SDH OC48/STM16 Optical Interface Specifications

NOTE:

To extend the life of the laser, when a PIC is not being actively used with any valid links,

take the PIC offline until you are ready to establish a link to another device. For information about
taking a PIC offline, see the

request chassis pic offline

command in the Junos OS Operational Mode

Commands.

Cables and connectors

One tricolor per port:

•

Off—Not enabled

•

Green—Online with no alarms or failures

•

Yellow—Online with alarms for remote failures

•

Red—Active with a local alarm; router has detected a failure

LEDs

127

SONET/SDH OC48c/STM16 PIC with SFP (T1600 Router)