Juniper Networks T1600 - Manual (Page 125)

• SONET alarms:
• Alarm indication signal—line (AIS-L)
• Alarm indication signal—path (AIS-P)
• Bit error rate—signal degrade (BERR-SD)
• Bit error rate—signal fail (BERR-SF)
• Bit interleaved parity (BIP) error B1, B2, B3
• Far-end bit error: remote error indication—line (REI-L), far-end line coding violations (CV-LFE)
• Far-end bit error: remote error indication—path (REI-P), far-end path coding violations
(CV-PFE)
• Loss of frame (LOF)
• Loss of pointer (LOP-P)
• Loss of signal (LOS)
• Payload label mismatch (PLM-P)
• Payload unequipped (unequipped STS at path level) (UNEQ-P)
• Remote defect indication—line (RDI-L)
• Remote defect indication—path (RDI-P)
• SDH alarms:
• Administrative unit alarm indication signal (AU-AIS)
• Bit error rate signal degrade (BERR-SD)
• Bit error rate signal fail (BERR-SF)
• Bit interleaved parity (BIP) error B1, B2, B3
• Higher order path—payload label mismatch (HP-PLM)
• Higher order path—loss of pointer (HP-LOP)
• Higher order path—remote defect indication (HP-RDI)
• Higher order path—unequipped (HP-UNEQ)
• Loss of frame (LOF)
• Loss of signal (LOS)
• Multiplex section—alarm indication signal (MS-AIS)
• Multiplex section—remote defect indication (MS-RDI)
• Multiplex section—remote error indication (MS-REI)
• Error detection:
• Errored seconds (ES-S, ES-L, ES-P)
• Far-end errored seconds (ES-LFE, ES-PFE)
• Far-end severely errored seconds (SES-LFE, SES-PFE)
• Far-end unavailable seconds (UAS-LFE, UAS-PFE)
• Severely errored framing (SEF)
• Severely errored framing seconds (SEFS-S)
• Severely errored seconds (SES-S, SES-L, SES-P)
• Unavailable seconds (UAS-L, UAS-P)
Alarms, errors, and
events
Related
Documentation
T1600 PIC Description on page 3 •
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
125 Copyright © 2013, Juniper Networks, Inc.
SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T1600 Router)