JVC TH-A9R - Manual (Page 57)

55 55 55 55
English
Engl
ish
English
English
Engli
s
h
English
English
■ ■
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control
signals for other manufacturers’ VCRs and TVs. By changing the
transmittable signals from preset ones to the other manufacturers’,
you can operate the other manufacturer’s components using this
remote control.
When operating the other manufacturers’ components, refer also
to the manuals supplied with them. To operate these components
with the remote control, first you need to set the manufacturer’s
code each for VCR and TV.
To change the transmittable signals for
operating another manufacturer’s TV
1 Press and hold TV .
Keep press until step 3 is finished.
2
Press TV.
3 Enter manufacturer’s code (2 digits) using
buttons 1 - 9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, then 1.
For a Hitachi product, press 0, then 7.
4 Release TV .
The following buttons can be used for operating the TV:
After pressing TV, you can perform the following operations
on a TV:
Note:
• Refer to the manual supplied with your TV.
5 Try to operate your TV by pressing TV .
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand
of TV,
try each one until the correct one is entered.
Manufactures’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
RM-STHA9R
DVD CINEMA SYSTEM
DVD MENU
TUNING UP DOWN
REC
/REW FF/
PAUSE
STROBE MEMORY
TV/VIDEO MUTING
F.SEARCH B.SEARCH
PTY SEARCH
EON SELECT
RDS DISPLAY
PTY- +PTY
PLAY
CHANNEL TV VOL VOLUME
STOP
DVD
AUDIO TV
STANDBY/ON
VCR
DECODE SUBTITLE TITLE AUDIO
TIME DIGEST ZOOM
VCR
TV
SLEEP
SETTING
TV RETURN FM MODE 100+
RDS
DVD
CONTROL SUBWOOFER EFFECT
CENTER TEST
REAR-R
ENTER
EON
PLAY
MODE
THEATER
POSITION
DSP
MODE
REAR-L
DISPLAY
CHOICE ANGLE RETURN SOUND
FM/AM AUX
TV : Turns on and off the TV.
TV VOL +/–: Adjusts the volume.
TV/VIDEO: Sets the input mode (either TV or VIDEO).
CHANNEL +/– : Changes the channels.
1 - 10, 0, 100+ (+10): Selects the channels.
100+ (+10) button will function as
the ENTER button if your TV
requires pressing ENTER after
selecting a channel number.
Manufacturer Code
JVC 01
AKAI 02, 05
BLAUPANKT 03
FENNER 04, 31, 32
FISHER 05
GRUNDIG 06
HITACHI 07, 08
INNO-HIT 09
IRRADIO 02, 05
MAGNAVOX 10
MITSUBISHI 11, 33
MIVER 03
NOKIA 12, 34
NORDMENDE 13, 14, 18, 26, 27, 28
OKANO 09
ORION 15
PANASONIC 16, 17
PHILIPS 10
SABA 13, 14, 18, 26, 27, 28
SAMSUNG 10, 19, 32
SANYO 05
SCHNEIDER 02, 05
SHARP 20
SONY 21, 22, 23, 24, 25
TELEFUNKEN 13, 14, 18, 26, 27, 28
THOMSON 13, 14, 18, 26, 27, 28, 30
TOSHIBA 29
DEAWOO 10, 31, 32
TH-A9(B).book Page 55 Saturday, February 3, 2001 12:53 PM