JAI AT-200GE - Manual (Page 8)

AT-200GE
- 6 -
Software installation
The JAI GigE Vision SDK & Control Tool can be downloaded from the JAI web site at
www.jai.com . The JAI SDK is available for Windows XP and Vista, 32-bit and 64-bit.
For the details of software installation, please refer to the “Getting Started Guide” supplied
on the JAI SDK download page.
Camera Operation
1. General
The AT-200GE is a digital 3CCD progressive scan RGB color camera. It employs three 1/1.8-
inch 1624 (h) x 1236 (v), 2 Megapixel CCDs and it runs at 15 frames per second in full
resolution mode. The AT-200GE has a GigE Vision interface and its output can be either 24-bit
or 32-bit RGB.
JAI developed a new 1/1.8-inch compact F4.0 prism optical system and in
combination with a linear color matrix, the AT-200GE provides a higher fidelity of color
reproduction. The AT-200GE also incorporates a dynamic shading circuit, gamma correction
circuit and knee correction circuit to provide high picture quality. Functions like partial
scanning and vertical binning allow higher frame rates.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of the JAI GigE Vision SDK & Control Tool for the AT-200GE can be
downloaded from: www.jai.com
For camera revision history, please contact your local JAI distributor.
2. Camera nomenclature
The standard camera composition consists of the camera main body and C-mount protection
cap.
The camera is available in the following versions:
AT-200GE
Where A stands for "Advanced" family, T stands for "3 CCD", 200 represents the resolution "2.0
million pixels" , and GE stands for "GigE Vision " interface.